MIL-PRF-44156E (GL)
4.3.4 Support or ownership requirements verification.
4.3.4.1 Shelf life analysis. Perform an analysis to demonstrate that the materials and
manufacturing processes of the KCLFF and KCLFF-E components listed in table I and table II
are similar to those in the currently fielded KCLFF and KCLFF-E, or are capable of meeting the
required shelf life.
4.3.4.2 Service life analysis. Perform an analysis to demonstrate that the materials and
manufacturing processes of the KCLFF and KCLFF-E components listed in table I and table II
are similar to those in the currently fielded KCLFF and KCLFF-E, or are capable of meeting the
required service life.
4.3.4.3 Durability tests. The components listed in table I and table II shall undergo drop tests.
Each component shall be dropped vertically from a height of 36 inches on two stacked 1/2-inch
thick plywood sheets. Verify that no fractures, deformation or breakage occur that will prevent
acceptable performance.
4.3.4.4 Weight demonstration. Weigh each of the components in table I and table II and
verify that the maximum weight allowance specified in tables I and II is not exceeded.
4.3.5 Environmental requirements verification. Assemble the components listed in table I
and table II after conditioning for 8 hours at -250F + 50F. Examine all components after assembly
completion to verify that there is no evidence of failures.
4.3.5.1 Corrosion resistance. The components listed in table I and table II shall show no
evidence of corrosion upon completion of the verifications contained in table III.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in
the contract or purchase order (see 6.2). When actual packaging of materiel is to be performed by
DoD personnel, these personnel need to contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are maintained by the Inventory
Control Point's packaging activity within the Military Department or Defense agency, or within
the Military Department's System Command. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business